ΠΡΟΣΟΧΗ!
What I do here, I do in my own car and at my own risk only, since it's my own car!
If you decide to do something similar and break / damage / burn / dismantle your car, it is your responsibility!
Clearly, then: I am NOT RESPONSIBLE for your losses!
26.10.2018
MK6 Climatic heater controls retrofit!!!!!
The harness. Let's fix the wiring!
I had the wiring plan (see previous page), I had the blue plug, so we had to lengthen the cables so that they could reach from the motor to the front of the AC.
The plug opens easily. I did it to see the pins' numbering.
There are 2 pieces that are clipping together.
Thank God, we have a lot of spare cables! some soldering and heat-shrinking later we are ready!
The harness!
And to complete THAT factory look, everything is wtrapped nicely with fabric tape!
And with the numbers numbered, we know where each cable is going. There was also a continuation check, just in case... You never know!
And starts loosening , since we have three main components: The motor, gear and facade.
So we start disassembly, since we have three main components: The motor, the gear and the facade.